Dry mortar production line or dry mix mortar production line is used for producing dry mortar, which mainly consists of the following parts: material store silo, sand dryer, spiral conveyor, weighing system
200,000T/Y Dry mix mortar plant or dry mix mortar production line is used for producing dry mortar, which mainly consists of the following parts: material store silo, sand dryer, spiral conveyor, weighing system, hoisting machine, pre-mixing silo, mixer, end product silo, packing machine, dust collector, air-phase equilibrium system, control system. The productivity of dry mortar plant is 5-100T/h.
Dry mortar is powdered or granular mixtures of aggregate, inorganic cementations materials and functional additives. It is made up of sand, cement, thickening powder, fly ash and addition. Also, add strong and efficient additives according to requirement. Transporting in bulk or packaged available, it can be used directly after mixing in proportions.
1. Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchorage mortar etc.
2. Decoration mortar: Decorative plaster, inner and outer wall putty, colorful decoration mortar etc.
3. Protection mortar: Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildewproof mortar, shielding mortar etc.
1. Binders: Cement, hydrated lime, anhydrite, gypsum.
2. Filler: Silica sand, quartz sand, limestone, dolomite, expanded perlite etc.
3. Mineral admixture: Ground granulated blast furnace slag, fly ash, pozzolana, fine silica powder etc.
4. Water-retention and thickening material.
Chemical additives: Cellulose esters, superplasticizer, air entraining agents, accelerating agents, retarding agents, defoaming agents, hydrophobic agents, and etc.
E-mail: market@sinoftm.com
Copyright© 2017 Fote Heavy Machinery. All rights reserved. Site Map
