Gyratory crusher belongs to large coarse crushing machine and its look is similar to a cylinder of cone crusher. Compared with jaw crusher that is also suitable for coarse crushing, gyrator crusher is still favorable due to its unique advantages.
E-mail:market@sinoftm.com
moreGyratory crusher belongs to large coarse crushing machine and its look is similar to a cylinder of cone crusher. Compared with jaw crusher that is also suitable for coarse crushing, gyrator crusher is still favorable due to its unique advantages.
Gyratory crusher is mainly composed of driving part, engine base, eccentric sleeve, crushing cone, middle bracket, beam, oil cylinder, hydraulic part, tackle, electrical part, dry and thin oil lubrication part. The space constituted by movable cone and fixed cone is crushing cone. When electric motor of gyratory crusher drives eccentric sleeve to rotate through belt pulley and cone gear, and eccentric sleeve will drive movable cone to rotate around the center line of the crusher, so that movable crusher gets close and then moves away from the fixed cone crusher, so that ores inside the crushing chamber will be squeezed, bent and then crushed. The crushed materials will be discharged from the bottom of the crushing chamber under gravity.
1. Gyratory crusher is safe, stable, solid and durable and it has good sealing property and little dust pollution.
2. It can crush various materials with over medium hardness and it has simple structure and convenient maintenance and application.
3. Gyratory crusher is able to adjust the discharging mouth suitable for crushing various type of materials, so that it has wide application, high output and high utilization rate.
Parameters of PXZ series
| Model | Size of feeding mouth (mm) |
Size of disch arging mouth (mm) |
Max. feeding size (mm) |
Adju sting range of disc haring mouth (mm) |
Bottom diameter of crushing cone (mm) |
Main motor | Specifi cation of lubri cating drill |
Cons umption of cooling water (m³/h) |
Output t/h |
|||
| Model | Power (KW) |
Rotating speed (r/min) |
Voltage (V) |
|||||||||
| PXZ 0506 |
500 | 60 | 420 | 60- 75 |
1200 | JR128 -10 |
130 | 585 | 380 | 40 | 3 | 140- 170 |
| PXZ 0710 |
700 | 100 | 580 | 100- 130 |
1400 | JR136 -8 |
145 | 730 | 3000 | 40 | 3 | 310- 400 |
| PXZ 0909 |
900 | 90 | 750 | 90- 120 |
1650 | JR137 -8 |
210 | 735 | 380 | 63 | 3 | 380- 510 |
| PXZ 0913 |
900 | 130 | 750 | 130- 160 |
1650 | JR137 -8 |
210 | 735 | 380 | 63 | 3 | 625- 770 |
| PXZ 0917 |
900 | 170 | 750 | 170- 190 |
1650 | JR137 -8 |
210 | 735 | 380 | 63 | 3 | 815- 910 |
| PXZ 1216 |
1200 | 160 | 1000 | 160- 190 |
2000 | JRQ158 -10 |
310 | 590 | 6000 | 125 | 3 | 1250- 1480 |
| PXZ 1221 |
1200 | 210 | 1000 | 210- 230 |
2000 | JRQ158 -10 |
310 | 590 | 6000 | 125 | 3 | 1560- 1720 |
| PXZ 1417 |
1400 | 170 | 1200 | 170- 200 |
2200 | JRQ1510 -10 |
430 | 590 | 3000 | 125 | 3 | 1750- 2060 |
| PXZ 1422 |
1400 | 220 | 1200 | 210- 230 |
2200 | JRQ1510 -10 |
430 | 590 | 3000 | 125 | 3 | 2160- 2370 |
| PXZ 1618 |
1600 | 180 | 1350 | 180- 210 |
2500 | JRQ158 -10 |
310 | 590 | 6000 | 125 | 3 | 2400- 2800 |
| PXZ 1623 |
1600 | 230 | 1350 | 210- 240 |
2500 | JRQ158 -10 |
310 | 590 | 6000 | 125 | 3 | 2800- 3200 |
Parameters of PXQ series
| Model | Size of feeding mouth (mm) |
Size of discharging mouth (mm) |
Max. feeding size (mm) |
Adjusting range of discharing mouth (mm) |
Bottom diameter of crushing cone (mm) |
Main motor | Specification of lubricating drill |
Consumption of cooling water (m³/h) |
Output t/h |
|||
| Model | Power (KW) |
Rotating speed (r/min) |
Voltage (V) |
|||||||||
| PXQ 0710 |
700 | 100 | 580 | 100- 120 |
1200 | JR128 -10 |
130 | 585 | 380 | 40 | 3 | 200 -240 |
| PXQ 0913 |
900 | 130 | 750 | 130- 150 |
1400 | JR136 -8 |
145 | 730 | 3000 | 40 | 3 | 350 -400 |
| PXQ 1215 |
1200 | 150 | 1000 | 150- 170 |
1650 | JR137 -8 |
210 | 735 | 380 | 63 | 6 | 720 -815 |
Parameters of PXF series
| Model | Size of feeding mouth (mm) |
Size of discharging mouth (mm) |
Max. feeding size (mm) |
Bottom diameter of crushing cone (mm) |
Main motor | Specification of lubricating drill |
Consumption of cooling water (m³/h) |
Output t/h |
|||
| Model | Power (KW) |
Rotating speed (r/min) |
Voltage (V) |
||||||||
| PXF 5474 |
1372 | 152 | 1150 | 1880 | YR400 -12/1180 |
400 | 490 | 6000 | 250 | 22.5 | 1740 |
| PXF 5484 |
1372 | 203 | 1150 | 2134 | YR500 -12/1180 |
500 | 490 | 6000 | 250 | 22.5 | 2500 |
| PFX 6089 |
1524 | 178 | 1300 | 2260 | YR118/46 -12 |
500 | 490 | 6000 | 400 | 39.5 | 3000 |
| PXF 60110 |
1524 | 178 | 1300 | 2784 | YR500/12 | 355×2 | 490 | 6000 | 400 | 39.5 | 4000 |
| PXF 7293 |
1829 | 178 | 1550 | 2362 | YR500- 20/1730 |
500 | 295 | 6000 | 400 | 39.5 | 2620 |
E-mail: market@sinoftm.com
Copyright© 2017 Fote Heavy Machinery. All rights reserved. Site Map
Get Price List
